Hail storms can cause significant damage to your roof and therefore it is very important that you get in touch with a good roofing company in Grapevine, Texas.
You will find many roofers in this area but one that stands out is Grapevine Tx Roofing Pro.
They are without any doubt one of the best Grapevine Roofing company and they have rich expertise in roof installation, replacement and roof repair.
So, in this blog, we would discuss about the 4 signs that indicate that your roof is damaged by Hail storm.
- Granules Missing
The top layer of the shingles are made by granules and then the substrate layer is followed by.
Whenever the hail storm occurs, then the granules are rubbed away from the shingles which further leaves the substate exposed.
So, the next thing that you need to do is to check if the granules are missing. If the granules are missing from the shingles, then the substate would appear shiny since it might be exposed.
In addition, you will also find the granules present in the gutters.
Hail storms can also cause bruising in the shingles. It is typically a bit hard to figure out bruising just by having a look into the roof.
Moreover, you would have to touch the shingles in order to identify the bruising.
Hail storms can leave strong depression on the shingles. For instance, the hail that fell into the roof was about an inch, then the depressions caused by it would be about half an inch in diameter.
On the contrary, if the hail that fell was larger, then the depressions that would be caused would be quite larger.
When the depressions are touched, then you would feel that it is a little squishy and soft.
These depressions can lead to shingles damage and can cause leaks down the line.
- Circular Cracks
The next thing that you need to check in your shingles is Circular cracks. If the hail storms are quite strong and break through the substate and granules on the tiles, then it can cause circular cracks.
It can either be full circular cracks or half circular cracks. Through these cracks, water can seep into the shingles to the various layers of the roof.
Cracks that are horizontally or vertically oriented are generally occurred from normal wear and tear and not exactly due to hail storm damage.
Most of the roof are not just compromised of shingles but rather from flashing as well.
Flashing is basically a metal transitional material that is basically used in the roof around the external valleys and structure on the roof.
Also, flashing is found around various structures which includes dormer, plumping vents, skylights, chimney. Etc.
During the time of hail storms, the metal flashing can become a lot dented. Also, the dents in the metal flashing can compromise the integrity and ability to perform the job.